Skip to main content

License and Certification Requirements

ROC Licenses

C-16 FIRE PROTECTION SYSTEMS

This classification allows the licensee to install, alter, and repair of fire protection systems using water, steam, gas, or chemicals. Included is any required excavation, trenching, backfilling and grading, piping from structure, and connections to off-premise water supply adjacent to property involving a fire protection system.

Systems may include the following areas of work and related equipment: restaurant hood protection systems; fire pumps and drivers; pressure and storage tanks; all piping and valves; sprinkler heads and nozzles; and application of materials for the prevention of corrosion or freezing.

Also included are air compressors, air receivers, bottled inert gases, pressurized chemicals, manifolds, pneumatic, hydraulic, or electrical controls, low voltage signaling systems, control piping, and the flushing and testing of systems.


CR-67 LOW VOLTAGE COMMUNICATION SYSTEMS

This classification allows the scopes of work permitted by the commercial C-67 Low Voltage Communication Systems and the residential R-67 Low Voltage Communication Systems licenses.

C-67 LOW VOLTAGE COMMUNICATION SYSTEMS

This classification allows the licensee to build antenna towers on existing structures as required for the licensee to install, service, and repair:

  1. Alarm systems
  2. Telephone systems
  3. Sound systems
  4. Intercommunication systems
  5. Public addressing systems
  6. Television or video systems
  7. Low voltage signaling devices
  8. Low voltage landscape lighting that does not exceed 91 volts
  9. Master and program clocks (only low voltage wiring and needed equipment)

CR-37 PLUMBING

This classification allows the scopes of work permitted by the commercial C-37 Plumbing and the residential R-37R Plumbing licenses.

C-37 PLUMBING

Installation, alteration, and repair of all plumbing when performed solely within property lines and not on public easements or right-of-ways, except as hereinafter provided.

Installation, alteration, and repair of all piping, fixtures, and appliances related to water supply, including pressure vessels and tanks (excluding municipal or related water supply systems); venting and sanitary drainage systems for all fluid, semi-fluid, and organic wastes; septic tanks and leaching lines; roof leaders; lawn sprinklers; water conditioning equipment; piping; and equipment for swimming pools.

Also included are piping, fixtures, appliances, and pressure vessels for manufactured and natural gases, compressed air and vacuum systems, petroleum, fuel oil, non-potable liquids, hot water heating, and hot water supply systems operating at pressures not exceeding 30 PSIG, or temperatures not exceeding 220° F; steam heating and steam supply systems not exceeding 15 PSIG operating pressure; gas or oil fired space heaters and furnaces, excluding duct work. Piping for water cooling systems, excluding the refrigerant piping and equipment. Testing and balancing of hydronics systems.

Sewer, gas, water lines, and connections from structure to the nearest point of public supply or disposal may cross public or private easements or be installed within private easements or right-of-ways. Pipe installed across public property may not be increased in size or make any other connection between the point of exit from private property to the point of connection at public supply or disposal. These lines shall not be installed parallel to main lines in public easements or right-of-ways.